Hi
My 2015 1.5L wrench light stated flashing. It started after I did a reset following an oil change.
There are no maintenance warnings. Any ideas on what may be causing this?
Thanks for the help.
Flashing Wrench Light
Try this..
1) Car off, press start button once
2) Press and hold start button and trip meter(without starting the car) for several seconds, an orange triangle will start flashing, when triangle stops flashing let go
3) Orange wrench is now gone
1) Car off, press start button once
2) Press and hold start button and trip meter(without starting the car) for several seconds, an orange triangle will start flashing, when triangle stops flashing let go
3) Orange wrench is now gone
-
- Posts: 2
- Joined: Sun Dec 01, 2019 5:09 am
Thanks! I tried this! Orange triangle did flash but wrench light is still flashing
- AndyRen
- Posts: 660
- Joined: Fri Mar 16, 2018 12:28 pm
- Location: Down a bit, down a bit more, right a bit, down a bit.... Right there - Kent
Have you checked the oil level? I think on the diesel there's an 'X' on the dipstick which (I again think) means too much, so level must be lowered.
16 plate 2L Petrol, 120bhp Soul Red Sport Nav...
There are no conditions in the Owner's Manual where the wrench flashes. It's normally off or on.
Julian.
Sept. 2015 CX-3 Sport Nav, Dynamic Blue Mica, 1.5 Diesel, AWD, Automatic
http://www.jtonline.info
Please add year of registration, model info., and location to your CX-3 Forums profile ~ See here for help: http://bit.ly/2fQzMfd
Sept. 2015 CX-3 Sport Nav, Dynamic Blue Mica, 1.5 Diesel, AWD, Automatic
http://www.jtonline.info
Please add year of registration, model info., and location to your CX-3 Forums profile ~ See here for help: http://bit.ly/2fQzMfd
Rgdworrell wrote: ↑Sun Dec 01, 2019 5:20 am Hi
My 2015 1.5L wrench light stated flashing. It started after I did a reset following an oil change.
There are no maintenance warnings. Any ideas on what may be causing this?
Thanks for the help.
Hi there,
Just wondering if you got it sorted yet ?
I do have the same issue with my wife 2016 1.5 diesel cx3.
Thanks
-
- Posts: 1
- Joined: Fri May 07, 2021 12:24 am
Having the same issues here... did you get it fixed? what was the issue?Stndwn37 wrote: ↑Wed May 05, 2021 8:41 amRgdworrell wrote: ↑Sun Dec 01, 2019 5:20 am Hi
My 2015 1.5L wrench light stated flashing. It started after I did a reset following an oil change.
There are no maintenance warnings. Any ideas on what may be causing this?
Thanks for the help.
Hi there,
Just wondering if you got it sorted yet ?
I do have the same issue with my wife 2016 1.5 diesel cx3.
Thanks
FLASHING WRENCH SOLVED
it is a warning to draining fuel sedimentor. Comes on every 20000kms of driving
Go to your mazda dealer, using their diagnostic equipment go to data reset and reset sediment. Will require doing everything 20000kms or at service
it is a warning to draining fuel sedimentor. Comes on every 20000kms of driving
Go to your mazda dealer, using their diagnostic equipment go to data reset and reset sediment. Will require doing everything 20000kms or at service
This is the advice contained in the Mazda CX-5 manual regarding the flashing Wrench for Diesel Engine cars.
Type A instrument cluster
Perform maintenance in accordance with the message.
Type B instrument cluster
When the ignition is switched ON, the wrench indicator light is illuminated and then turns off after a few seconds.
When illuminated
The wrench indicator light turns on under the following conditions:
When the preset maintenance period has arrived.
When it’s time to replace the engine oil.
Refer to Maintenance Monitor (Search).
When flashing (SKYACTIV-D 2.2)
The sedimentor separates water from the fuel.
If water accumulates in this filter, the warning light will flash. When it does, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
Type A instrument cluster
Perform maintenance in accordance with the message.
Type B instrument cluster
When the ignition is switched ON, the wrench indicator light is illuminated and then turns off after a few seconds.
When illuminated
The wrench indicator light turns on under the following conditions:
When the preset maintenance period has arrived.
When it’s time to replace the engine oil.
Refer to Maintenance Monitor (Search).
When flashing (SKYACTIV-D 2.2)
The sedimentor separates water from the fuel.
If water accumulates in this filter, the warning light will flash. When it does, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
2018 CX-3 Machine Grey 2.0 Petrol 150ps Auto Sports Nav AWD plus Safety Pack