Hello, out there.
Just bought a CX3 Nav Sport AWD AUTO, after trading in my CX5 ( too big for my wife to drive down the narrow lanes where we live).
I would really like to gain another inch in height, on both the drivers seat and the front passenger. It appears to be quite straightforward to use, say , an aluminium block and an extended high tensile bolt to achieve this, has anyone found a solution, please?
Other than that, really pleased with the much improved economy from the 1.5dci unit, over the 2.2 that I had in the CX5. The LED Headlamps are also much better , but it is strange that there is no accessory socket in the boot!
Cheers
seat height
-
- Posts: 283
- Joined: Tue Oct 24, 2017 9:46 pm
- Location: Crowborough, East Sussex
With something as important as secure seating, please bear in mind that any change from the standard factory fitments may invalidate your insurance.
Car sold - but still following Mazda.
Handy Andy wrote: ↑Fri Feb 02, 2018 2:47 pm With something as important as secure seating, please bear in mind that any change from the standard factory fitments may invalidate your insurance.
And probably your warranty.
SINCE FEB 2018 I NO LONGER OWN VEHICLE
CX-3 Sport Nav - 2.0L Petrol - 2017 - Manual - 2WD - Eternal Blue Metallic - Half Leather - 44.3mpg on a good day down hill with a strong wind behind
CX-3 Sport Nav - 2.0L Petrol - 2017 - Manual - 2WD - Eternal Blue Metallic - Half Leather - 44.3mpg on a good day down hill with a strong wind behind